Duration and severity of COVID-19 symptoms among primary healthcare workers: A cross-sectional survey.

AIMS: This study aims to investigate the epidemiological characteristics of COVID-19 infection among healthcare workers, including the severity, duration of infection, post-infection symptoms and related influencing factors. METHODS: A self-administered questionnaire was utilized to assess the post-infection status of primary healthcare workers in Jiangsu Province. The questionnaire collected information on demographic characteristics, lifestyle habits, post-infection clinical manifestations, work environment and recovery time of the respondents. Customized outcome events were selected as dependent variables and logistic regression models were employed to analyse the risk factors. Phi-coefficient was used to describe the relationship between post-infection symptoms. RESULTS: The analysis revealed that several factors, such as female, older age, obesity, previous medical history, exposure to high-risk environments and stress, were associated with a higher likelihood of experiencing more severe outcomes. On the other hand, vaccination and regular exercise were found to contribute to an earlier resolution of the infection. Among the post-infection symptoms, cough, malaise and muscle aches were the most frequently reported. Overall, there was a weak association among symptoms persisting beyond 14 days, with only cough and malaise, malaise and dizziness and headache showing a stronger correlation. CONCLUSION: The study findings indicate that the overall severity of the first wave of infection, following the complete lifting of restrictions in China, was low. The impact on primary healthcare workers was limited, and the post-infection symptoms exhibited similarity to those observed in other countries. It is important to highlight that these conclusions are specifically relevant to the population infected with the Omicron variant. IMPACTS: This study helps to grasp the impacts of the first wave of COVID-19 infections on healthcare workers in China after the national lockdown was lifted. PATIENTS: Primary healthcare workers in Jiangsu Province, including doctors, nurses, pharmacists and other personnel from primary healthcare units such as community health service centres and health centres.

Phase-locked µPIV analysis of flow dynamics in a simulated root canal with different laser-activated irrigations.

PURPOSE: To measure the dynamic characteristics of the flow field in a complex root canal model activated by two laser-activated irrigation (LAI) modalities at different activation energy outputs: photon-induced photoacoustic streaming (PIPS) and microshort pulse (MSP). METHODS: A phase-locked micro-scale Particle Image Velocimetry (µPIV) system was employed to characterise the temporal variations of LAI-induced velocity fields in the root canal following a single laser pulse. The wall shear stress (WSS) in the lateral root canal was subsequently estimated from the phase-averaged velocity fields. RESULTS: Both PIPS and MSP were able to generate the 'breath mode' of the irrigant current under all tested conditions. The transient irrigation flush in the root canal peaked at speeds close to 6 m/s. However, this intense flushing effect persisted for only about 2000 µs (or 3% of a single laser-pulse activation cycle). For MSP, the maximum WSS magnitude was approximately 3.08 Pa at an activation energy of E = 20 mJ/pulse, rising to 9.01 Pa at E = 50 mJ/pulse. In comparison, PIPS elevated the WSS to 10.63 Pa at E = 20 mJ/pulse. CONCLUSION: Elevating the activation energy can boost the peak flushing velocity and the maximum WSS, thereby enhancing irrigation efficiency. Given the same activation energy, PIPS outperforms MSP. Additionally, increasing the activation frequency may be an effective strategy to improve irrigation performance further.

Drug-induced hypersensitivity syndrome related to piperacillin-tazobactam: a case report and review of the literature.

Allergic reactions to drugs caused by piperacillin-tazobactam are common in clinical practice. However, we also found a few cases of drug-induced hypersensitivity syndrome (DiHS)/Drug reaction with eosinophilia and systemic symptoms (DRESS) caused by piperacillin-tazobactam in our clinical work. We report a case of a 60-year-old female patient who was treated with piperacillin-tazobactam anti-infective therapy after the diagnosis of hematogenous lung abscess, developed fever, rash, and blood abnormalities after 26 days of application, and was later diagnosed as DIHS, which was improved after the administration of glucocorticoid and anti-allergic drugs. In addition, we also retrospectively analyzed 17 cases of DiHS caused by piperacillin-tazobactam from the PubMed databases between March 1980 and September 2023. The majority of the patients had an incubation period of more than 14 days, and the common clinical features included elevated eosinophil count/percentage, fever, rash, liver damage, and lymph node enlargement. After treatment with topical or systemic glucocorticoids, 16 of the 17 patients improved and one died because of the underlying condition. The clinical features of DiHS were diverse and included a long incubation period, skin rash, elevated eosinophils, and impaired organ function. Since some patients have atypical clinical features, clinicians should raise awareness of the disease, recognize these features early, and treat them promptly.

Design and evaluation of an MMP-9-responsive hydrogel for vital pulp therapy.

OBJECTIVE: To design and evaluate a matrix metalloproteinase 9 (MMP-9)-responsive hydrogel for vital pulp therapy. METHODS: A peptide linker with optimized sensitivity toward MMP-9 was crosslinked with 4-arm poly (ethylene glycol)-norbornene (PEG-NB) by thiol-norbornene photo-polymerization. This resulted in the formation of a hydrogel network in which the peptide IDR-1002 was incorporated. Hydrogel characterization and gelation kinetics were examined with Fourier-transform infrared spectroscopy, scanning electron microscopy, rheological testing, and swelling evaluation. Hydrogel degradation was examined through multiple exposure to pre-activated MMP-9, to simulate flare-ups of dental pulp inflammation. The IDR-1002 released from degraded hydrogels was measured with high-performance liquid chromatography. Effect of IDR-1002 released from hydrogels on one-week-old multispecies oral biofilms was evaluated using confocal laser scanning microscopy. RESULTS: MMP-9-responsive, injectable, and photo-crosslinkable hydrogels were successfully synthesized. When hydrogel degradation and release of IDR-1002 were examined with exposure to pre-activated MMP-9, IDR-1002 release was significantly correlated with elevated levels of MMP-9 (p < 0.05). The effectiveness of IDR-1002 in killing bacteria in multispecies oral biofilms was significantly enhanced when the hydrogels were immersed in 10 nM or 20 nM pre-activated MMP-9, compared to immersion in phosphate-buffered saline (p < 0.05). CONCLUSIONS: The MMP-9-responsive hydrogel is a promising candidate for on-demand delivery of bioactive agent in vital pulp therapy. CLINICAL SIGNIFICANCE: MMP-9 is one of the most important diagnostic and prognostic biomarkers for pulpitis. An MMP-9-responsive hydrogel has potential to be used as an in-situ on-demand release system for the diagnosis and treatment of dental pulp inflammation.

Effects of Sodium Hypochlorite Concentration and Application Time on Bacteria in an Ex Vivo Polymicrobial Biofilm Model.

INTRODUCTION: In endodontic treatment, it is important to remove or inactivate biofilms in the root canal system. We investigated the effects of different concentrations and application times of sodium hypochlorite (NaOCl) on the viability of bacteria in ex vivo polymicrobial biofilms of different maturation levels. METHODS: Polymicrobial biofilms were prepared from dental plaque samples and grown for 1, 2, and 3 weeks under anaerobic conditions on collagen-coated hydroxyapatite discs as an ex vivo biofilm model. The biofilms were then exposed to NaOCl at concentrations ranging from 0.1% to 2% for 1 or 3 minutes. The control group was exposed to sterile distilled water. Viability staining was performed and examined by confocal laser scanning microscopy to determine the percentage of biofilm bacteria killed by NaOCl. Scanning electron microscopy was also performed to visually examine the biofilms. RESULTS: Application of NaOCl at 0.5%-2% for both 1 and 3 min killed significantly more bacteria when compared to the controls (P < .05). Cell viability tended to be lower after the application of NaOCl for 3 minutes than that for 1 minute. CONCLUSIONS: Our experiments using an ex vivo model showed that within the range of 0.1%-2% of NaOCl, higher NaOCl concentrations and longer application times were more effective in killing biofilm bacteria, and that mature biofilms were more resistant to NaOCl than younger biofilms.

Research progress of out-of-plane GeSn nanowires.

With the increasing integration density of silicon-based circuits, traditional electrical interconnections have shown their technological limitations. In recent years, GeSn materials have attracted great interest due to their potential direct bandgap transition and compatibility with silicon-based technologies. GeSn materials, including GeSn films, GeSn alloys, and GeSn nanowires, are adjustable, scalable, and compatible with silicon. GeSn nanowires, as one-dimensional (1D) nanomaterials, including out-of-plane GeSn nanowires and in-plane GeSn nanowires, have different properties from those of bulk materials due to their distinctive structures. However, the synthesis and potential applications of out of plane GeSn nanowires are rarely compared to highlighting their current development status and research trends in relevant review papers. In this article, we present the preparation of out-of-plane GeSn nanowires using top-down (etching and lithography) and bottom-up (vapor-liquid-solid) growth mechanism in the vapor-phase method and supercritical fluid-liquid-solid, solution-liquid-solid, and solvent vapor growth mechanisms in the liquid-phase method) methods. Specifically, the research progress on typical out of plane GeSn nanowires are discussed, while some current development bottlenecks are also been identified. Finally, it is also provided a brief description of the applications of out-of-plane GeSn nanowires with various Sn contents and morphologies.

Optimizing the intermediates adsorbability and revealing the dynamic reconstruction of Co6Fe3S8 solid solution for bifunctional water splitting.

Co9S8 has been extensively studied as a promising catalyst for water electrolysis. Doping Co9S8 with Fe improves its oxygen evolution reaction (OER) performance by regulating the catalyst self-reconfigurability and enhancing the absorption capacity of OER intermediates. However, the poor alkaline hydrogen evolution reaction (HER) properties of Co9S8 limit its application in bifunctional water splitting. Herein, we combined Fe doping and sulfur vacancy engineering to synergistically enhance the bifunctional water-splitting performance of Co9S8. The as-synthesized Co6Fe3S8 catalyst exhibited excellent OER and HER characteristics with low overpotentials of 250 and 84 mV, respectively. It also resulted in the low Tafel slopes of 135 mV dec-1 for the OER and 114 mV dec-1 for the HER. A two-electrode electrolytic cell with Co6Fe3S8 used as both the cathode and anode produced a current density of 10 mA cm-2 at a low voltage of only 1.48 V, maintaining high stability for 100 h. The results of in/ex-situ experiments indicated that the OER process induced electrochemical reconfiguration, forming CoOOH/FeOOH active species on the catalyst surface to enhance its OER performance. Density functional theory (DFT) simulations revealed that Fe doping and the presence of unsaturated coordination metal sites in Co6Fe3S8 promoted H2O and H* adsorption for the HER. The findings of this study can help develop a strategy for designing highly efficient bifunctional water splitting electrocatalysts.

Association of volatile organic compound exposure with metabolic syndrome and its components: a nationwide cross-sectional study.

BACKGROUND: Metabolic syndrome (MetS) is a health issue consisting of multiple metabolic abnormalities. The impact of exposure to volatile organic compounds (VOCs) on MetS and its components remains uncertain. This study aimed to assess the associations of individual urinary metabolites of VOC (mVOCs) and mVOC mixtures with MetS and its components among the general adult population in the United States. METHODS: A total of 5345 participants with eligible data were filtered from the 2011-2020 cycles of the National Health and Nutrition Examination Survey. Multivariate logistic regression models were applied to assess the associations of individual mVOCs with MetS and its components. The least absolute shrinkage and selection operator (LASSO) regression models were constructed to identify more relevant mVOCs. The weight quantile sum regression model was applied to further explore the links between mVOC co-exposure and MetS and its components. RESULTS: The results indicated positive associations between multiple mVOCs and MetS, including CEMA, DHBMA, and HMPMA. CEMA was found to be positively correlated with all components of MetS. HMPMA was associated with elevated triglyceride (TG), reduced high-density lipoprotein, and fasting blood glucose (FBG) impairment; 3HPMA was associated with an elevated risk of high TG and FBG impairment; and DHBMA had positive associations with elevated TG and high blood pressure. The co-exposure of LASSO-selected mVOCs was associated with an increased risk of elevated TG, high blood pressure, and FBG impairment. CONCLUSION: Positive associations of certain individual urinary mVOCs and mVOC mixtures with MetS and its components were observed by utilizing multiple statistical models and large-scale national data. These findings may serve as the theoretical basis for future experimental and mechanistic studies and have important implications for public health.

Comparation of the effectiveness of conventional needle irrigation and photon-induced photoacoustic streaming with sodium hypochorite in the treatment of teeth with apical periodontitis: a randomized clinical trial.

Photon-initiated photoacoustic streaming (PIPS) with an Er: YAG laser has been introduced in root canal treatment to improve irrigation and facilitate the removal of bacteria in the root canal system. This study aimed to compare the antibacterial effectiveness of two different root canal irrigation techniques, conventional needle irrigation (CNI) and PIPS, using 1% sodium hypochlorite (NaOCl), in the treatment of teeth with apical periodontitis. Sixty patients with a total of sixty teeth affected by apical periodontitis were included in this study. The teeth underwent root canal therapy, and after mechanical instrumentation, they were randomly assigned to two groups (n = 30) based on the final irrigation protocol: CNI or PIPS with 1% NaOCl. Bacterial suspensions in the root canals were evaluated using Adenosine 5'-triphosphate (ATP) assay kit after mechanical instrumentation and after final irrigation. Then, a follow-up was conducted after 7 days. The results revealed that final irrigation significantly reduced ATP values in both the CNI and PIPS groups (P < 0.001). The ATP values after final irrigation was greater in the CNI group compared to the PIPS group (P < 0.001). After a 7-day follow-up, percussion tenderness and fistula were significantly resolved in both groups (P < 0.05). A multivariate linear regression model was used to identify the factors that influence post irrigation ATP values. The analysis demonstrated that pre-operative percussion tenderness (P = 0.006), the presence of a fistula (P < 0.001) and the method used in the final irrigation (P < 0.001) had a significant impact on the ATP value after final irrigation. These results indicate that employing PIPS with 1% NaOCl as the final irrigation protocol exhibited superior antibacterial effectiveness and has the potential to enhance clinical outcomes in the treatment of teeth afflicted with apical periodontitis.

Acute pneumonia due to Tropheryma whipplei diagnosed by metagenomic next-generation sequencing and pathology: A case report.

Tropheryma whipplei (TW) is a rod-shaped, gram-positive bacterium that, when chronically infects humans, can lead to multi-system pathologies, including joint pain, abdominal pain with diarrhea and weight loss, myocarditis, pericarditis, and neurologic inflammation. Moreover, acute infections can lead to bronchopulmonary infections, bacteraemia, and acute diarrhea. However, fewer cases of acute pneumonia due to TW have been reported, and this diagnosis is not well founded. Herein, we report a case of acute pneumonia caused by a TW infection. The patient, a middle-aged man, underwent bronchoscopic alveolar lavage, and the metagenomic next-generation sequencing of the lavage fluid suggested TW infection. A lung puncture biopsy tissue specimen was also positive based on periodic acid-Schiff staining. After confirming the diagnosis, the patient was administered ceftriaxone for anti-infection treatment, improving clinical symptoms and lung imaging results. Therefore, in cases where conventional anti-infective treatment is ineffective for patients with acute pneumonia, we should consider the possibility of TW infection, conduct prompt pathogenetic examination, and provide timely treatment after diagnosis to improve overall patient prognosis.

Endodontic Treatment of a Maxillary First Molar With Two Separate Palatal Roots: A Case Report.

Maxillary first molars exhibit considerable anatomical variation, with a single palatal root being the most common occurrence, while two palatal roots are notably less frequent. This case report details the endodontic treatment of a maxillary first molar with two separate palatal roots. It highlights the critical importance of recognizing these anatomical variations and their unique challenges during endodontic procedures. This report emphasizes the essential role of advanced diagnostic methods, such as cone-beam computed tomography, and the use of microscopic techniques in identifying and treating such cases.

The dynamics of bacterial proliferation, viability, and extracellular polymeric substances in oral biofilm development.

OBJECTIVES: This study investigated the relationship between bacterial growth, viability, and extracellular polymeric substances (EPS) formation in biofilms, particularly regarding resistance development. It also examined the impact of chemical factors on the EPS matrix and bacterial proliferation in oral biofilms. METHODS: Three multi-species oral biofilms were incubated in anaerobic conditions. Three strains of Enterococcus faecalis were incubated in aerobic conditions. The incubation periods ranged from 0 h to 7 days for short-term biofilms, and from 3 to 90 days for long-term biofilms. Fluorescent labeling with carboxyfluorescein diacetate succinimidyl ester (CFSE) and flow cytometry were used to track EPS and bacterial growth. Confocal laser scanning microscopy (CLSM) assessed bacterial viability and EPS structure. Biofilms aged 7, 14, and 21 days were treated with 2 % chlorhexidine (CHX) and 1 % sodium hypochlorite (NaOCl) to evaluate their effects on EPS and bacterial proliferation. RESULTS: Short-term biofilms showed rapid bacterial proliferation and a gradual increase in EPS, maintaining stable viability. In the first two weeks, a significant rise in CFSE indicated growing maturity. From 14 to 90 days, EPS and CFSE levels stabilized. Following treatment, CHX significantly reduced bacterial proliferation, while NaOCl decreased EPS volume. CONCLUSIONS: Biofilm development involves a balance between bacterial proliferation and EPS production. The complexity of this process poses challenges in treating biofilm-associated infections, requiring strategies tailored to the biofilm's developmental stage. CLINICAL SIGNIFICANCE: For effective root canal treatment, it is imperative to focus on reducing bacterial proliferation during the early stages of oral infections. In contrast, strategies aimed at minimizing EPS production could be more beneficial for long-term management of these conditions.

In vitro efficacy of Er:YAG laser-activated irrigation versus passive ultrasonic irrigation and sonic-powered irrigation for treating multispecies biofilms in artificial grooves and dentinal tubules: an SEM and CLSM study.

BACKGROUND: Multispecies biofilms located in the anatomical intricacies of the root canal system remain the greatest challenge in root canal disinfection. The efficacy of Er:YAG laser-activated irrigation techniques for treating multispecies biofilms in these hard-to-reach areas has not been proved. The objective of this laboratory study was to evaluate the effectiveness of two Er:YAG laser-activated irrigation techniques, namely, photon-induced photoacoustic streaming (PIPS) and shock wave-enhanced emission photoacoustic streaming (SWEEPS), in treating multispecies biofilms within apical artificial grooves and dentinal tubules, in comparison with conventional needle irrigation (CNI), passive ultrasonic irrigation (PUI), and sonic-powered irrigation (EDDY). Two types of multispecies root canal biofilm models were established in combination with two assessment methods using scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) with the aim to obtain more meaningful results. METHODS: Ninety extracted human single-rooted premolars were chosen for two multispecies biofilm models. Each tooth was longitudinally split into two halves. In the first model, a deep narrow groove was created in the apical segment of the canal wall. After cultivating a mixed bacterial biofilm for 4 weeks, the split halves were reassembled and subjected to five irrigation techniques: CNI, PUI, EDD, PIPS, and SWEEPS. The residual biofilms inside and outside the groove in Model 1 were analyzed using SEM. For Model 2, the specimens were split longitudinally once more to evaluate the percentage of killed bacteria in the dentinal tubules across different canal sections (apical, middle, and coronal thirds) using CLSM. One-way analysis of variance and post hoc multiple comparisons were used to assess the antibiofilm efficacy of the 5 irrigation techniques. RESULTS: Robust biofilm growth was observed in all negative controls after 4 weeks. In Model 1, within each group, significantly fewer bacteria remained outside the groove than inside the groove (P < 0.05). SWEEPS, PIPS and EDDY had significantly greater biofilm removal efficacy than CNI and PUI, both from the outside and inside the groove (P < 0.05). Although SWEEPS was more effective than both PIPS and EDDY at removing biofilms inside the groove (P < 0.05), there were no significant differences among these methods outside the groove (P > 0.05). In Model 2, SWEEPS and EDDY exhibited superior bacterial killing efficacy within the dentinal tubules, followed by PIPS, PUI, and CNI (P < 0.05). CONCLUSION: Er:YAG laser-activated irrigation techniques, along with EDDY, demonstrated significant antibiofilm efficacy in apical artificial grooves and dentinal tubules, areas that are typically challenging to access.

Effect of MT Technology of Heat Treatment on Reciproc: Comparison of Reciproc, Reciproc Blue, and Reciproc MT.

INTRODUCTION: This study aimed to evaluate the effects from the memory-triple (MT) heat treatment on the fatigue resistance of the Reciproc by comparison with the file systems of same geometry. METHODS: Reciproc files subjected to MT heat treatment technology were designated as Group RMT and were compared with the original Reciproc (Group REC) and Reciproc Blue (Group REB). Each NiTi file from 3 groups (n = 15) was operated reciprocally with a repetitive up-and-down movement in the curved canal with 4 mm of pecking distance inside of the simulated canal at body temperature. When each file fractured, the time until fracture was recorded. The length of the fractured fragment was measured. Fractured fragments were observed under scanning electron microscope (SEM) to evaluate the topographic features of the surface. Differential scanning calorimetry (DSC) analysis was performed to estimate phase transformation temperatures. One-way analysis of variance and Duncan post hoc comparison were applied to compare among the groups at a significance level of 95%. RESULTS: RMT showed significantly higher fracture resistance (P < .05), whereas there was no difference in fatigue resistance between REC and REB. SEM examination showed the files from the 3 groups had similar topographic features. RMT showed a peak of austenite peak (Ap) at a temperature (52°C) higher than body temperature, whereas REC and REB showed Ap at 37 and 32°C, respectively. CONCLUSIONS: Under the condition of this study, the new heat treatment technique of MT technology could enhance the fatigue fracture resistance of the reciprocating files made of M-wire and Blue-wire.

Locating and Treating Three Calcified Canals in a Mandibular First Molar With Radix Entomolaris and Five Canals: A Case Report.

The success of root canal treatment is highly contingent on the comprehensive shaping, cleaning, and filling of the entire root canal system. Failure to address one or more canals often results in an increased likelihood of post-treatment apical periodontitis. Typically, mandibular first molars feature two roots and three canals, but they may also exhibit anatomical variations, such as a mesial middle canal or radix entomolaris (RE). This article presents a case where three calcified canals in a mandibular first molar with RE and five canals were successfully located and treated.

Endodontic Retreatment of a Mandibular Second Molar With a C-shaped Root Canal Configuration: A Case Report.

Root canal retreatment in mandibular second molars with C-shaped root canal configurations presents notable challenges. This article presents a case of successful root canal retreatment in a mandibular second molar exhibiting this complex configuration. Achieving a successful endodontic outcome in such cases necessitates a comprehensive understanding of the unique root canal anatomy. Moreover, the employment of advanced instruments and techniques is crucial to effectively address the intricacies of the C-shaped root canal system.

Endodontic Treatment of Two Calcified Mandibular Central Incisors: A Case Report.

Treating calcified root canals presents significant challenges, as incorrect approaches can result in treatment failure or lead to complications. The necessity for advanced diagnostic and therapeutic tools is often paramount in these situations. This case report demonstrates the successful treatment of two calcified mandibular central incisors, followed up for a period of up to six years. It emphasizes the effectiveness of integrating cone-beam computed tomography, dental operating microscopes, and ultrasonic instruments in the treatment of such challenging cases.